SolarEdge SE100K – 100kw 3phase on-grid solar inverter

183,510,000₫

Model: SE100K
Rated AC Power Output: 100kw, 3 phase
Maximum Continuous Output Current (per Phase): 145Aac
Maximum Inverter Efficiency: 98.3%
Nominal Input Voltage DC+ to DC-: 750Vdc

SKU: SE100k Categories: Inverter, SolarEdge

SE100K: 100kw 3phase on-grid solar inverter SolarEdge

Powered by unique pre-commissioning process for rapid system installation

Pre-commissioning feature for automated validation of system components and wiring during the site installation process and prior to grid connection.
Easy 2-person installation with lightweight, modular design (each inverter consists of 2 or 3 Synergy Units and one Synergy Manager).
Independent operation of each Synergy Unit enables higher uptime and easy serviceability.
Built-in thermal sensors detect faulty wiring ensuring enhanced protection and safety.
Built-in arc fault protection and optional rapid shutdown.
Built-in PID mitigation for maximized system performance.
Monitored* and field-replaceable surge protection devices, to better withstand surges caused by lightning or other events: integrated RS485 and Type 2 DC SPDs, optional Type 2 AC SPD.
Optional integrated DC safety switch eliminates the need for external DC isolators.
Built-in module-level monitoring with Ethernet or cellular communication for full system visibility.

The PV Inverter with the Small Footprint and Big Capacity

SolarEdge’s expanded offering of three phase inverters with synergy technology up to 100kW combines large capacity with ease of installation. The inverter design is based on small, lightweight, and easy-to-carry primary and secondary units. They are wall mounted for a minimal footprint, with installation only requiring a one or two-person crew.

No crane or special tools are needed when installing the inverter, unlike alternative large capacity inverters on the market today, which are heavy, bulky, and difficult to install. Installing SolarEdge’s large capacity inverters instead of using multiple, smaller capacity inverters will further reduce setup times and costs.

This new generation of SolarEdge three phase inverters is available in the following sizes: 50kW, 55kW, and 82.8kW as well as 66.6kW and 100kW for medium voltage grids.

Easy Inverter Commissioning with Inverter SetApp

SolarEdge single phase inverters now have a smart new commissioning method. Inverter commissioning is done directly through a smartphone using the intuitive SetApp mobile application. Take your inverter commissioning to the next level.

Inverter hòa lưới 17kw 3 pha - SolarEdge SE17K

Installation Videos:

Part 1: Mountingg

Part 2: Connection

Part 3: Configuring

SPECIFICATIONS

Three Phase Inverter with Synergy Technology SE66.6K / SE100K / SE120K

Applicable to Inverter with Part Number	SExxK-xxx0Ixxxx		SExxK-xxx8Ixxxx
Applicable to Inverter with Part Number	SE66.6K for 400V Grid	SE100K for 400V Grid	SE120K for 400V Grid
OUTPUT
Rated AC Active Output Power	66600	100000	120000	W
Maximum AC Apparent Output Power	66600	100000	120000	VA
AC Output Voltage – Line to Line / Line to Neutral (Nominal)	380/220 ; 400/230		480 / 277	Vac
AC Output Voltage – Line to Line / Line to Neutral	304 – 437 / 176 – 253 ; 320 – 460 /184 – 264.5			Vac
AC Frequency	50/60 ± 5%			Hz
Maximum Continuous Output Current (per Phase) @Vac,nom	96.5	145	145	A
Grids Supported — Three Phase	3 / N / PE (WYE with Neutral)
Maximum Residual Current Injection ⁽¹⁾	200	300		mA
Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds	Yes
Total Harmonic Distortion	≤ 3
Power Factor Range	+/-0.8 to 1
INPUT
Maximum DC Power (Module STC) Inverter / Synergy Unit	100000 / 50000	150000 / 50000	180000 / 60000	W
Transformer-less, Ungrounded	Yes
Maximum Input Voltage DC+ to DC-	1000			Vdc
Nominal Input Voltage DC+ to DC-	750			Vdc
Maximum Input Current	2 x 48.25	3 x 48.25		Adc
Reverse-Polarity Protection	Yes
Ground-Fault Isolation Detection	167kΩ Sensitivity per Synergy Unit ⁽²⁾
Maximum Inverter Efficiency	98.3		98.1	%
European Weighted Efficiency	98			%
Nighttime Power Consumption	<8	<12		W
ADDITIONAL FEATURES
Supported Communication Interfaces ⁽³⁾	2 x RS485, Ethernet, Wi-Fi (optional), Cellular (optional)
RS485 Surge Protection	Built-in
Smart Energy Management	Export Limitation
Inverter Commissioning	With the SetApp mobile application using built-in Wi-Fi access point for local connection
Arc Fault Protection	Built-in, user configurable (according to UL1699B)
Rapid Shutdown	Optional⁽⁶⁾ (Automatic upon AC Grid Disconnect)
PID Rectifier	Nighttime, built-in
RS485 Surge Protection (ports 1+2)	Type II, field replaceable, integrated
DC Surge Protection	Type II, field replaceable, integrated
AC Surge Protection	Type II, field replaceable, optional
DC Fuses (Single Pole)	25A, optional
DC Disconnect Switch	Optional
STANDARD COMPLIANCE
Safety	IEC-62109-1, IEC-62109-2
Grid Connection Standards ⁽⁴⁾	VDE-AR-N-4105, AS-4777, EN 50549-1, EN 50549-2, CEI-021, VDE 0126-1-1, CEI-016
Emissions	IEC61000-6-2, IEC61000-6-3 Class A, IEC61000-3-11, IEC61000-3-12
RoHS	Yes
INSTALLATION SPECIFICATIONS
Number of Synergy Units per Inverter	2	3
AC Wire Cross Section and Outer Diameter: Line/PE (Aluminum or Copper	Cross section up to 120 / 70 mm2; outer diameter 30-50 / 12-20 mm
DC Input: Inverter / Synergy Unit⁽⁵⁾⁽⁶⁾	8 / 4 MC4 pairs, Gland, 2 pairs / 1 pair, Cross section up to 50 mm2, aluminum or copper cable outer diameter 12-20	Gland, 3 pairs / 1 pair, Cross section up to 50 mm2, aluminum or copper cable outer diameter 12-20 mm
Dimensions (H x W x D)	Synergy Unit: 558 x 328 x 273 Synergy Manager: 360 x 560 x 295			mm
Weight	Synergy Unit: 32 Synergy Manager: 18			kg
Operating Temperature Range	-40 to +60 ⁽⁷⁾			˚C
Cooling	Fan (user replaceable)
Noise	< 57			dBA
Protection Rating	IP65 — Outdoor and Indoor
Mounting	Brackets provided
⁽¹⁾ If an external RCD is required, its trip value must be ≥ 200mA for SE66.6K; ≥ 300mA for SE100K/SE120K ⁽²⁾ Where permitted by local regulations ⁽³⁾For specifications of the optional communication options, visit https://www.solaredge.com/products/communication or the Resource Library webpage: https://www.solaredge.com/resource-library, to download the relevant product datasheet ⁽⁴⁾For all standards and certificates download, refer to the Certifications category on the Resource Library webpage: https://www.solaredge.com/resource-library ⁽⁵⁾DC input is available with MC4 or Gland connection under the inverter part number. For more information, contact SolarEdge ⁽⁶⁾Only MC4 connectors manufactured by Staubli are approved for use ⁽⁷⁾For power de-rating information refer to: https://www.solaredge.com/sites/default/files/se-temperature-derating-note.pdf

Downloads


Power Optimizer P605/P650/P701/P730/P800p/P801/P850/P950/P1100 datasheet
SE66.6K – SE100K Three Phase  Inverter with  Synergy Technology

Reviews

There are no reviews yet.

Show reviews in all languages (2)